Araştırma Makalesi
BibTex RIS Kaynak Göster

Eklemeli imalat ile üretilmiş AlSi10Mg parçalara ardıl ısıl işlem süreleri ve üretim yönü parametrelerinin etkisinin incelenmesi

Yıl 2022, Cilt: 11 Sayı: 4, 1146 - 1153, 14.10.2022
https://doi.org/10.28948/ngumuh.1133444

Öz

Bu çalışmada, Eklemeli İmalat ile üretilmiş parçaların inşa yönü ve farklı yaşlandırma sürelerinin parça üzerindeki etkileri incelenmiştir. Seçici Lazer Ergitme yöntemi (SLE) ile 0o – 45 – 90o inşa yönlerinde üretilmiş numunelere daha sonra çözeltiye alma ısıl işlemi uygulanmıştır. Takiben oda sıcaklığında su verme işlemine tabii tutulmuştur. Ardından da T4 ve T6 yaşlandırma işlemleri uygulanmıştır T6 yapay yaşlandırma işleminin avantajlarını görebilmek için numunelere farklı sürelerde ısıl işlem uygulanmıştır. Isıl işlemle yoğunluğun önemli ölçüde değişmediği görülmekle birlikte, özellikle T6 koşulları için ısıl işlem süresinin artmasıyla birlikte sertlik değerinin %35 civarında azaldığı belirtilmiştir. Uygulanan sıcaklığın, inşa yönünün ve ısıl işlem sürelerinin bir fonksiyonu olarak mikro yapıdaki düzensizlikler incelenmiş ve sertlik değerleriyle ilişkilendirilmiştir. İnşa yönü ve yoğunluk sonuçlarının sertlik üzerinde önemli bir etkisinin olmadığı görülmüştür.

Proje Numarası

5189901

Kaynakça

  • B. Saleh et al., 30 Years of functionally graded materials: An overview of manufacturing methods, Applications and Future Challenges, Composite Part B Engineering, 201, 108-376, 2020. https://doi.org /10.1016/j.compositesb.2020.108376.
  • J. Y. Lee, J. An, and C. K. Chua, Fundamentals and applications of 3D printing for novel materials, Applied Materials Today, 7, 120–133, 2017. https://doi.org /10.1016/j.apmt.2017.02.004.
  • Wohlers T, Campbell RI., Wohlers report 2020: 3D printing and additive manufacturing state of the industry annual worldwide progress report. Fort Collins, Colo: Wohlers Associates; 2020.
  • L. Yi, C. Gläßner, and J. C. Aurich, How to integrate additive manufacturing technologies into manufacturing systems successfully: A perspective from the commercial vehicle industry, Journal of Manufacturing Systems, 53, 195–211, 2019. https://doi.org/10.1016/j.jmsy.2019.09.007.
  • J. J. Lewandowski and M. Seifi, Metal additive manufacturing: A Review of mechanical properties, Annual Review of Material Research, 46, 151–186, 2016. https://doi.org/10.1146/annurev-matsci-070115-032024.
  • A. Majeed, Y. Zhang, J. Lv, T. Peng, Z. Atta, and A. Ahmed, Investigation of T4 and T6 heat treatment influences on relative density and porosity of AlSi10Mg alloy components manufactured by SLM, Computational Industrial Engineering, 139, 106-194, 2020. https://doi.org/10.1016/j.cie.2019.106194.
  • L. Zhou, A. Mehta, E. Schulz, B. McWilliams, K. Cho, and Y. Sohn, Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment, Materials Characterization, 143, 5–17, 2018. https://doi.org/10.1016/j.matchar.2018. 04.022.
  • M. Moustafa, F. Samuel, H. Doty, Effect of solution heat treatment and additives on the microstructure of Al-Si (A413.1) automotive alloys, Journal of Material Science, 38, 4507-4522, 2003. https://doi.org /10.1023/A:1027333602276
  • I. Gutierrez-Urrutia, M. Munoz-Morris, D.G. Morris, Contribution of microstructural parameters to strengthening in an ultrafine-grained Al–7% Si alloy processed by severe deformation, Acta Materials, 55, 1319–1330, 2007. https://doi.org/10.1016/j.actamat.2006.09.037
  • B. Li, H. Wang, J. Jie, Z. Wei, Effects of yttrium and heat treatment on the micro- structure and tensile properties of Al–7.5 Si–0.5 Mg alloy, Materials Design, 32, 1617–1622, 2011. https://doi.org/10.1016/j.matdes.2010.08.040
  • M. Tang, P.C. Pistorius, J.L. Beuth, Prediction of lack-of-fusion porosity for powder bed fusion, Additive Manufacturing, 14, 39–48, 2017. https://doi.org/10.1016/j.addma.2016.12.001
  • NT. Aboulkhair, I. Maskery, C. Tuck, I. Ashcroft, N.M. Everitt, The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment, Material Science and Engineering, 667, 139-146, 2016. https://doi.org/10.1016/j.msea.2016.04.092.
  • W. Li, S. Li, J. Liu, A. Zhang, Y. Zhou, Q. Wei, C. Yan, Y. Shi, Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism, Material Science and Engineering, 663, 116-125, 2016. https://doi.org/10.1016/j.msea.2016. 03.088.
  • L. Girelli, M. Tocci, M. Gelfi, A. Pola, Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy, Material Science and Engineering, 739, 317-328, 2019. https://doi.org/10.1016/ j.msea.2018.10.026.
  • K. Zyguła, B. Nosek, H. Pasiowiec, N. Szysiak, Mechanical properties and microstructure of AlSi10Mg alloy obtained by casting and SLM technique, Results in Materials 104, 462-472, 2018.
  • X. Yu, L. Wang, T6 heat-treated AlSi10Mg alloys additive-manufactured by selective laser melting, Procedia Manufacturing, 15, 1701-1707, 2018. https://doi.org/ 10.1016/j.promfg.2018.07.265.
  • L. Zhou, A. Mehta, E. Schulz, B. McWilliams, K. Cho, Y. Sohn, Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment, Material Characterisation, 143, 5-17, 2018. https://doi.org/10.1016/j.matchar.2018. 04.022.
  • E. Padovano, C. Badini, A. Pantarelli, F. Gili, and F. D'Aiuto, A comparative study of the effects of thermal treatments on AlSi10Mg produced by laser powder bed fusion, Journal of Alloys Compound, 831, 154-822, 2020. doi: 10.1016/j.jallcom.2020.154822.
  • A. Bendijk, R. Delhez, L. Katgerman, T.H. De Keijser, E.J. Mittemeijer, N.M. Van Der Pers, Characterization of Al-Si-alloys rapidly quenched from the melt, Journal of Material Science, 15, 2803–2810, 1980. https://doi.org/10.1007/BF00550549.
  • H.J. Axon, W. Hume-Rothery, The Lattice spacings of solid solutions of different elements in aluminium, Proceedings of Royal Society London Series A Mathematical Physical and Engineering Science, 193 1–24, 1948. https://doi.org/10.1098/rspa.1948.0030.
  • K.G.G. Prashanth, S. Scudino, H.J.J. Klauss, K.B.B. Surreddi, L. Löber, Z. Wang, a. K.K. Chaubey, U. Kühn, J. Eckert, Microstructure and mechanical properties of Al- 12Si produced by selective laser melting: Effect of heat treatment, Material Science and Engineering A, 590, 153–160, 2014. https://doi.org/10.1016/j.msea.2013.10.023.
  • L. Hitzler, C. Janousch, J. Schanz, M. Merkel, B. Heine, F. Mack, W. Hall, A. Öchsner, Direction and location dependency of selective laser melted AlSi10Mg specimens, Journal Materials Processing and Technology, 243, 48–61, 2017. https://doi.org/10.1016/j.jmatprotec.2016.11.029.
  • J. Fite, S. Eswarappa Prameela, J. A. Slotwinski, and T. P. Weihs, Evolution of the microstructure and mechanical properties of additively manufactured AlSi10Mg during room temperature holds and low temperature aging, Additive Manufacturing, 36, 101-429, 2020. https://doi.org/10.1016/j.addma. 2020.101429.
  • H. Ali, H. Ghadbeigi, K. Mumtaz, Effect of scanning strategies on residual stress and mechanical properties of selective laser melted Ti6Al4V, Material Science and Engineering A, 712, 175–187, 2018. https://doi.org/ 10.1016/j.msea.2017.11.103
  • H. Asgari, C. Baxter, K. Hosseinkhani, M. Mohammadi, On microstructure and mechanical properties of additively manufactured AlSi10Mg_200C using recycled powder, Material Science and Engineering A, 707, 148–158, 2017. https://doi.org/10.1016/j.msea.2017.09. 041.
  • DD. Gu, W. Meiners, K. Wissenbach, R. Poprawe, Laser additive manufacturing of metallic components: materials, processes and mechanisms. International Materials Review, 57, 133–164, 2012. https://doi. org/10.1179/1743280411Y.0000000014
  • S. M. Yusuf, M. Hoegden, and N. Gao, Effect of sample orientation on the microstructure and microhardness of additively manufactured AlSi10Mg processed by high-pressure torsion, International Journal of Advance Manufacturing Technology, 106, 4321–4337, 2020. https://doi. org/10.1007/s00170-019-04817-5.
  • Z. H. Li, Y. F. Nie, B. Liu, Z. Kuai, M Zhao, and F.Liu, Mechanical properties of AlSi10Mg lattice structures fabricated by selective laser melting, Materials & Design, 192, 108-709, 2020.
  • A. Majeed, Y. Zhang, J. Lv, T. Peng, Z. Atta, and A Ahmed, Investigation of T4 and T6 heat treatment influences on relative density and porosity of AlSi10Mg alloy components manufactured by SLM, Computers & Industrial Engineering, 139, 106-194, 2020. https://doi.org/10.1016/j.cie.2019.106194
  • N. O. Larrosa, W. Wang, N. Read, M. Loretto, H. Evans, C. Carr, J. and, P. J. Withers, Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy, Theoretical and Applied Fracture Mechanics, 98, 123-133, 2018. https://doi.org/10.1016/j.tafmec. 2018.09.011

Investigation on post heat treatment parameters of additively manufactured AlSi10Mg parts in terms of time and build direction

Yıl 2022, Cilt: 11 Sayı: 4, 1146 - 1153, 14.10.2022
https://doi.org/10.28948/ngumuh.1133444

Öz

This study reports the combinatorial influence of build direction and different ageing times. The Additively Fabricated (AF) with selective laser melting (SLM) specimens built-in various build directions (0o – 45o - 90o). Accordingly, Solution Heat Treatment (SHT) was applied then quenched in water at room temperature afterward. Subsequently, T4 and T6 ageing procedures were executed. Besides achieving advantageous T6 artificial ageing (AA), specimens were exposed to different time combinations (0.5, 1, 2, 6, 10 h). Although it was observed that the density did not change significantly with heat treatment, it was indicated that the hardness value decreased around 35% with the decrease in time, especially for T6 conditions. The microstructure disparity as a function of the utilized temperature, build direction, and time of the specimens were correlated to hardness values. It was observed that build direction and relative density results have no significant effect on the hardness.

Destekleyen Kurum

TÜBİTAK

Proje Numarası

5189901

Teşekkür

This study is a part of the project (# 5189901) supported by The Scientific and Technological Research Council of Turkey (TÜBİTAK) under the Frontier R&D Laboratory Support Programme and hosted in Turkish Aerospace Industries Inc. The authors also acknowledge the support of King Fahd University of Petroleum and Minerals (KFUPM) in Saudi Arabia, Gazi University Turkey, and King Abdullah City for Atomic and Renewable Energy (K.A.CARE) to accomplish this work.

Kaynakça

  • B. Saleh et al., 30 Years of functionally graded materials: An overview of manufacturing methods, Applications and Future Challenges, Composite Part B Engineering, 201, 108-376, 2020. https://doi.org /10.1016/j.compositesb.2020.108376.
  • J. Y. Lee, J. An, and C. K. Chua, Fundamentals and applications of 3D printing for novel materials, Applied Materials Today, 7, 120–133, 2017. https://doi.org /10.1016/j.apmt.2017.02.004.
  • Wohlers T, Campbell RI., Wohlers report 2020: 3D printing and additive manufacturing state of the industry annual worldwide progress report. Fort Collins, Colo: Wohlers Associates; 2020.
  • L. Yi, C. Gläßner, and J. C. Aurich, How to integrate additive manufacturing technologies into manufacturing systems successfully: A perspective from the commercial vehicle industry, Journal of Manufacturing Systems, 53, 195–211, 2019. https://doi.org/10.1016/j.jmsy.2019.09.007.
  • J. J. Lewandowski and M. Seifi, Metal additive manufacturing: A Review of mechanical properties, Annual Review of Material Research, 46, 151–186, 2016. https://doi.org/10.1146/annurev-matsci-070115-032024.
  • A. Majeed, Y. Zhang, J. Lv, T. Peng, Z. Atta, and A. Ahmed, Investigation of T4 and T6 heat treatment influences on relative density and porosity of AlSi10Mg alloy components manufactured by SLM, Computational Industrial Engineering, 139, 106-194, 2020. https://doi.org/10.1016/j.cie.2019.106194.
  • L. Zhou, A. Mehta, E. Schulz, B. McWilliams, K. Cho, and Y. Sohn, Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment, Materials Characterization, 143, 5–17, 2018. https://doi.org/10.1016/j.matchar.2018. 04.022.
  • M. Moustafa, F. Samuel, H. Doty, Effect of solution heat treatment and additives on the microstructure of Al-Si (A413.1) automotive alloys, Journal of Material Science, 38, 4507-4522, 2003. https://doi.org /10.1023/A:1027333602276
  • I. Gutierrez-Urrutia, M. Munoz-Morris, D.G. Morris, Contribution of microstructural parameters to strengthening in an ultrafine-grained Al–7% Si alloy processed by severe deformation, Acta Materials, 55, 1319–1330, 2007. https://doi.org/10.1016/j.actamat.2006.09.037
  • B. Li, H. Wang, J. Jie, Z. Wei, Effects of yttrium and heat treatment on the micro- structure and tensile properties of Al–7.5 Si–0.5 Mg alloy, Materials Design, 32, 1617–1622, 2011. https://doi.org/10.1016/j.matdes.2010.08.040
  • M. Tang, P.C. Pistorius, J.L. Beuth, Prediction of lack-of-fusion porosity for powder bed fusion, Additive Manufacturing, 14, 39–48, 2017. https://doi.org/10.1016/j.addma.2016.12.001
  • NT. Aboulkhair, I. Maskery, C. Tuck, I. Ashcroft, N.M. Everitt, The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment, Material Science and Engineering, 667, 139-146, 2016. https://doi.org/10.1016/j.msea.2016.04.092.
  • W. Li, S. Li, J. Liu, A. Zhang, Y. Zhou, Q. Wei, C. Yan, Y. Shi, Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism, Material Science and Engineering, 663, 116-125, 2016. https://doi.org/10.1016/j.msea.2016. 03.088.
  • L. Girelli, M. Tocci, M. Gelfi, A. Pola, Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy, Material Science and Engineering, 739, 317-328, 2019. https://doi.org/10.1016/ j.msea.2018.10.026.
  • K. Zyguła, B. Nosek, H. Pasiowiec, N. Szysiak, Mechanical properties and microstructure of AlSi10Mg alloy obtained by casting and SLM technique, Results in Materials 104, 462-472, 2018.
  • X. Yu, L. Wang, T6 heat-treated AlSi10Mg alloys additive-manufactured by selective laser melting, Procedia Manufacturing, 15, 1701-1707, 2018. https://doi.org/ 10.1016/j.promfg.2018.07.265.
  • L. Zhou, A. Mehta, E. Schulz, B. McWilliams, K. Cho, Y. Sohn, Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment, Material Characterisation, 143, 5-17, 2018. https://doi.org/10.1016/j.matchar.2018. 04.022.
  • E. Padovano, C. Badini, A. Pantarelli, F. Gili, and F. D'Aiuto, A comparative study of the effects of thermal treatments on AlSi10Mg produced by laser powder bed fusion, Journal of Alloys Compound, 831, 154-822, 2020. doi: 10.1016/j.jallcom.2020.154822.
  • A. Bendijk, R. Delhez, L. Katgerman, T.H. De Keijser, E.J. Mittemeijer, N.M. Van Der Pers, Characterization of Al-Si-alloys rapidly quenched from the melt, Journal of Material Science, 15, 2803–2810, 1980. https://doi.org/10.1007/BF00550549.
  • H.J. Axon, W. Hume-Rothery, The Lattice spacings of solid solutions of different elements in aluminium, Proceedings of Royal Society London Series A Mathematical Physical and Engineering Science, 193 1–24, 1948. https://doi.org/10.1098/rspa.1948.0030.
  • K.G.G. Prashanth, S. Scudino, H.J.J. Klauss, K.B.B. Surreddi, L. Löber, Z. Wang, a. K.K. Chaubey, U. Kühn, J. Eckert, Microstructure and mechanical properties of Al- 12Si produced by selective laser melting: Effect of heat treatment, Material Science and Engineering A, 590, 153–160, 2014. https://doi.org/10.1016/j.msea.2013.10.023.
  • L. Hitzler, C. Janousch, J. Schanz, M. Merkel, B. Heine, F. Mack, W. Hall, A. Öchsner, Direction and location dependency of selective laser melted AlSi10Mg specimens, Journal Materials Processing and Technology, 243, 48–61, 2017. https://doi.org/10.1016/j.jmatprotec.2016.11.029.
  • J. Fite, S. Eswarappa Prameela, J. A. Slotwinski, and T. P. Weihs, Evolution of the microstructure and mechanical properties of additively manufactured AlSi10Mg during room temperature holds and low temperature aging, Additive Manufacturing, 36, 101-429, 2020. https://doi.org/10.1016/j.addma. 2020.101429.
  • H. Ali, H. Ghadbeigi, K. Mumtaz, Effect of scanning strategies on residual stress and mechanical properties of selective laser melted Ti6Al4V, Material Science and Engineering A, 712, 175–187, 2018. https://doi.org/ 10.1016/j.msea.2017.11.103
  • H. Asgari, C. Baxter, K. Hosseinkhani, M. Mohammadi, On microstructure and mechanical properties of additively manufactured AlSi10Mg_200C using recycled powder, Material Science and Engineering A, 707, 148–158, 2017. https://doi.org/10.1016/j.msea.2017.09. 041.
  • DD. Gu, W. Meiners, K. Wissenbach, R. Poprawe, Laser additive manufacturing of metallic components: materials, processes and mechanisms. International Materials Review, 57, 133–164, 2012. https://doi. org/10.1179/1743280411Y.0000000014
  • S. M. Yusuf, M. Hoegden, and N. Gao, Effect of sample orientation on the microstructure and microhardness of additively manufactured AlSi10Mg processed by high-pressure torsion, International Journal of Advance Manufacturing Technology, 106, 4321–4337, 2020. https://doi. org/10.1007/s00170-019-04817-5.
  • Z. H. Li, Y. F. Nie, B. Liu, Z. Kuai, M Zhao, and F.Liu, Mechanical properties of AlSi10Mg lattice structures fabricated by selective laser melting, Materials & Design, 192, 108-709, 2020.
  • A. Majeed, Y. Zhang, J. Lv, T. Peng, Z. Atta, and A Ahmed, Investigation of T4 and T6 heat treatment influences on relative density and porosity of AlSi10Mg alloy components manufactured by SLM, Computers & Industrial Engineering, 139, 106-194, 2020. https://doi.org/10.1016/j.cie.2019.106194
  • N. O. Larrosa, W. Wang, N. Read, M. Loretto, H. Evans, C. Carr, J. and, P. J. Withers, Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy, Theoretical and Applied Fracture Mechanics, 98, 123-133, 2018. https://doi.org/10.1016/j.tafmec. 2018.09.011
Toplam 30 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Makine Mühendisliği
Bölüm Makine Mühendisliği
Yazarlar

Remzi Ecmel Ece 0000-0002-8797-4224

Ömer Keleş 0000-0002-3480-3456

Bekir Sami Yiılbas 0000-0003-0670-6306

Proje Numarası 5189901
Yayımlanma Tarihi 14 Ekim 2022
Gönderilme Tarihi 20 Haziran 2022
Kabul Tarihi 1 Temmuz 2022
Yayımlandığı Sayı Yıl 2022 Cilt: 11 Sayı: 4

Kaynak Göster

APA Ece, R. E., Keleş, Ö., & Yiılbas, B. S. (2022). Investigation on post heat treatment parameters of additively manufactured AlSi10Mg parts in terms of time and build direction. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 11(4), 1146-1153. https://doi.org/10.28948/ngumuh.1133444
AMA Ece RE, Keleş Ö, Yiılbas BS. Investigation on post heat treatment parameters of additively manufactured AlSi10Mg parts in terms of time and build direction. NÖHÜ Müh. Bilim. Derg. Ekim 2022;11(4):1146-1153. doi:10.28948/ngumuh.1133444
Chicago Ece, Remzi Ecmel, Ömer Keleş, ve Bekir Sami Yiılbas. “Investigation on Post Heat Treatment Parameters of Additively Manufactured AlSi10Mg Parts in Terms of Time and Build Direction”. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 11, sy. 4 (Ekim 2022): 1146-53. https://doi.org/10.28948/ngumuh.1133444.
EndNote Ece RE, Keleş Ö, Yiılbas BS (01 Ekim 2022) Investigation on post heat treatment parameters of additively manufactured AlSi10Mg parts in terms of time and build direction. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 11 4 1146–1153.
IEEE R. E. Ece, Ö. Keleş, ve B. S. Yiılbas, “Investigation on post heat treatment parameters of additively manufactured AlSi10Mg parts in terms of time and build direction”, NÖHÜ Müh. Bilim. Derg., c. 11, sy. 4, ss. 1146–1153, 2022, doi: 10.28948/ngumuh.1133444.
ISNAD Ece, Remzi Ecmel vd. “Investigation on Post Heat Treatment Parameters of Additively Manufactured AlSi10Mg Parts in Terms of Time and Build Direction”. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 11/4 (Ekim 2022), 1146-1153. https://doi.org/10.28948/ngumuh.1133444.
JAMA Ece RE, Keleş Ö, Yiılbas BS. Investigation on post heat treatment parameters of additively manufactured AlSi10Mg parts in terms of time and build direction. NÖHÜ Müh. Bilim. Derg. 2022;11:1146–1153.
MLA Ece, Remzi Ecmel vd. “Investigation on Post Heat Treatment Parameters of Additively Manufactured AlSi10Mg Parts in Terms of Time and Build Direction”. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, c. 11, sy. 4, 2022, ss. 1146-53, doi:10.28948/ngumuh.1133444.
Vancouver Ece RE, Keleş Ö, Yiılbas BS. Investigation on post heat treatment parameters of additively manufactured AlSi10Mg parts in terms of time and build direction. NÖHÜ Müh. Bilim. Derg. 2022;11(4):1146-53.

download